Electrical Safety - Black+Decker KX3300 Manual Del Usuario

Do not leave the unit unat-
tended when switched on.
The steam plate becomes
hot during use. Always hold
the steam plate by the handle
provided.
Danger of scalding, do not
direct steam at persons,
animals or anything which can
O
100 C
be damaged.
Do not place the unit at an
angle, do not use the unit on
stairs.
The unit must be kept level at
all times.
WARNING: Danger of
Scalding
Warning symbols
The following symbols are used in this
manual:
Read all of this manual care-
fully before using your appli-
ance.
Always wear protective
gloves.
Always wear eye protection.
Denotes risk of electric shock.
Surfaces may become hot
during use and during the cool
down period.
(Original instructions)

Electrical safety

This product must be earthed.
Always check that the power
supply corresponds to the volt-
age on the rating plate.
Power plugs must match the outlet.
Never modify the plug in any way. Un-
modified plugs and matching outlets will
reduce the risk of electric shock.
Extension cables & class 1
product
A 3 core cable must be used as your
u
appliance is earthed and of class 1
construction.
Features
1. Boiler carrying handle
2. Pressure relief valve
3. Boiler reservoir
4. Water level indication
5. Hose
6. Steam plate
7. Filler cap
Assembly
Fitting the hose (fig. A and B)
Screw one end of the hose (5) to the hose connector on
u
the boiler tank. Check that the hose has been connected
properly.
Connect the other end of the hose (5) to the steam plate.
u
Check that the hose has been connected properly.
Use
Surfaces may become hot in use. The filler cap
may be hot during use and during the cool down
period.
Initial filling of the boiler reservoir (fig. C)
Warning! Make sure that the appliance is unplugged.
Unscrew and remove the filler cap (7).
u
Note: When filling the boiler, use clean tap water only.
Fill the boiler reservoir (3) with water. Do not overfill the
u
reservoir past the MAX indicator (maximum 4 litres).
ENGLISH
7