Ves Electric VES1025 Manual De Instrucciones página 5

appliance running dry while operating.
Do not fill with more than 0.5 liter of
water to "max" indication. Wipe up the
outer surface of the appliance if it is
wet.
2. Please put the appliance on the dry,
smooth, horizontal, heat resistant sur-
face. Make sure O/I switch in O posi-
tion. Insert the plug to the socket. Place
O/I switch to I position, the indicator
light will be on and the appliance will
be under working.
3. After the water boiling, the appliance will stop working automati-
cally, indicator light will be off, but O/I switch will remain in I position.
It is the reheating function. When water temperature goes under
70° C, after about 20-45 minutes the appliance will start working
again and will boil the water till 99° C and will switch off. Cooling
of water depends on its volume in the appliance and the ambient
temperature. The faster the water cools down, the sooner the appli-
ance boils it again.
Please turn O/I switch to O position if you don't want reheating func-
tion and pull out the plug from mains.
Note: reheating function can not be for a long time, as the
capacity of the appliance is MAX 0.5 L. Mind it well.
If you want to boil water fast, turn the switch to 0 position. Pour the
warm water out, pour in the cold water and switch on the appliance
again.
CLEANING
1. Turn the switch to O position and unplug the appliance from mains.
2. Let the appliance cool down. Pour water away.
3. Never immerse any part of the appliance, especially a cord and
plug in any liquid.
4. Always make sure that electrical connections of the appliance are
remaining absolutely dry.
5. Clean the appliance outer shell with a damp cloth. Do not use
4