Cod. 96849-99176
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
Denotes risk of personal injury, loss of life, or damage to the tool in case of non-observance
Use eye protection
Use ear protection
Conforms to all regulatory standards in the country in the EU where the products is purchased
Wear sturdy, non-slip footwear
Read the user manual
Use protective gloves
Do not expose to rain
Keep children at a distance of
no less than 10m from the work
area
Debris may be ejected from the
discharge chute(图片请改成园框的)
This product is double insulated electrically
Disconnect from mains power immediately if the power cord becomes damaged.
Beware of sharp blades. Blades continue to rotate after the motor is switched off-
Remove plug from mains before maintenance or if cord is damaged.
Keep supply flexible cord away from cutting mains
V-ASSEMBLY INSTRUCTIONS
Preparation:
1.
Put the cable hook on upper handle.(Fig.1a)
2.
Connect upper and lower handles with supplied screws and knobes.(Fig.1b)
3.
Insert the handles into the mower body.(Fig.1c)
4.
Fit each wheels over the axles, secure in place with the "R" pins (Fig.1d)
5.
Fix the cable holders.(Fig.1e)
6.
Grass collecton box assembly. Assemble two halves and fix them together.(Fig.1f)
7.
Lift the flap and place the grass box over the lugs.(Fig.1g)
8.
Press the wheel covers into place. (Fig.1h)