Installation Procedure; Notes For Installation - MyTek 3198 Manual De Instrucciones

Installation procedure

1.Remove the ceiling panel at the location
where the fan is to be installed.
3. Open the ceiling tile next to the grid
wherethe fan is being installed, and
insert the power cord into the quick
connector.

Notes for installation

Please read this manual before installation.
The fan should be installed at a height of at least 2.3 meters above the ground.
Please ask a person with electrical technical qualifications to help install this product.
Be sure to confirm that the electrical voltage is 127 V~ before installation, and please follow
electrical guidelines when installing the unit.
This air circulation fan is to be installed on a safety-qualified light-weight steel frame
(600x600mm).When installing into a wood or aluminum ceiling, please re-enforce the load
-bearing surface around the frame to support the weight of the fan, and to avoid possible danger
caused by insufficient support.
When installing two or more fans in the same ceiling, there should be a distance of four grids
between each fan. This distance allows the fans to perform efficiently.
2.Insert the fan into the grid by aiming the top
of the fan perpendicularly into one of the
corners of the grid.
4. After connecting to the power, place the
ceiling tile back in its original location and
confirm that the fan is leveled.
AC127
8