Safety Precautions - Evolution R225DWS Instrucciones Originales

www.evolutionpowertools.com
INTENDED USE OF
(1.10)
THIS POWER TOOL
WARNING: This product is a Hand Held Dry
Wall Sander and has been designed to be
used in conjunction with a dust extraction
and collection system. Only use accessories
designed for use in this machine and/or those
recommended specifically by Evolution
Power Tools Ltd.
When fitted with appropriate abrasive paper
this machine can be used for sanding:
Dry Walls.
Dry Ceilings.
Dry Floors.
It can also be used to remove paint coatings,
adhesive and loose plaster etc.
PROHIBITED USE OF
THIS POWER TOOL
WARNING: This product is a Hand Held Dry
Wall Sander and must only be used as such. It
must not be modified in any way, or used to
power any other equipment or drive any other
accessories other than those mentioned in this
Instruction Manual.
WARNING: This machine must NOT be
used on any surface which is suspected to
contain lead or asbestos.
If the presence of either of these
substances is even suspected, have the
work-place inspected by the appropriate
local authority department.
Lead can be found in some old painted
surfaces, and is highly toxic when
disturbed.
Asbestos is highly dangerous and has
to be dealt with by highly trained and
specially equipped removal teams.
Consult your local authority for further
advice and guidance.

SAFETY PRECAUTIONS

(1.13) WARNING: This machine is not
intended for use by persons (including
children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning the safe
use of the machine by a person responsible
for their safety and who is competent in its
safe use.
Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with, this machine.
ELECTRICAL SAFETY
(1.14)
This machine is fitted with the correct
moulded plug and mains lead for the
designated market. If the mains lead or the
plug are damaged in any way, they must be
replaced with original replacement parts by a
competent technician.
OUTDOOR USE
(1.15)
WARNING: For your protection if this tool is to
be used outdoors it should not be exposed to
rain, or used in damp locations. Do not place
the tool on damp surfaces. Use a clean, dry
workbench if available. For added protection
use a residual current device (R.C.D.) that will
interrupt the supply if the leakage current to
earth exceeds 30mA for 30ms. Always check
the operation of the residual current device
(R.C.D.) before using the machine.
If an extension cable is required it must be a
suitable type for use outdoors and so labelled.
The manufacturers instructions should be
followed when using an extension cable.
POWER TOOL GENERAL
(2.1)
SAFETY INSTRUCTIONS
(These General Power Tool Safety Instructions
are as specified in BS EN 60745-1:2009 &
EN 61029-1:2009)
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/ or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5
EN