Incoming Calls; Using Open Listening / Hands-Free - Gigaset DA611 Manual De Instrucciones

Dialling from the call list
The call list contains the numbers of the last 50 incoming calls.
Requirement: Telephone number display is possible for incoming calls
£
( page 12).
Multiple calls from one number are only displayed once (with the infor-
mation of the last call). If the name is transmitted or the number is saved
Y
to the phonebook, the accompanying name is also displayed.
Open the call list using the control key
q
Select the number or name.
either ...
c
Lift the handset.
... or
[
Open the context menu.
q
[
Select Call back and initiate the call using the speaker with
. To make the call using the handset, simply lift the
handset.
Note
You can also first lift the handset before opening the call list.
Last number redial
The last five numbers dialled are automatically saved (each a max. of
32 digits).
c I
Dialling the last saved number:
Lift the handset, press the redial key.
I
Dialling one of the last five numbers saved:
Press the redial key.
or
K
¢
Redial
q
Select the number.
c
Lift the handset.
or
v
Initiate the call using the speaker with
Speed dialling
£
10 numbers can be saved for speed dial on the number keys 0 ... 9
( page 10).
J
Press the speed dial key.
Q O
... Press the speed dial number key.
c
Lift the handset or press the
or
[
Open the context menu.
q
Select Dial entry and confirm with
The number stored on the number key is dialled.
Note
[
You can also first lift the handset before pressing the speed dial key
and then press .
el en es it pt
t
.
[
.
@
.
[
.
Dialling pauses
One or more dialling pauses can be entered using
I
Pauses are transferred to the memory and are necessary for certain
extension systems (e.g. 0
The length of the pause can be set to 1, 3 or 6 seconds (

Incoming calls

£
Incoming calls are indicated by the ring tone and in the display.
f
For number displays ( page 12), the number is visible in the display
and the symbol flashes. This symbol disappears when you answer the
call or (if you don't answer) by calling up the call list. The name is also dis-
played for callers who are stored in the phonebook or speed dial keys
£
with names.
If the VIP mode is activated (
display and the VIP ring tone signals the call.
Accepting a call
c
Lift the handset.
@
or
Press the hands-free key to accept the call via the speaker.
Call waiting
An incoming call is indicated during the conversation. You will hear the
call waiting tone. The display shows the caller number if the number can
£
be displayed, and the name if it is saved in the phonebook or the speed
dial keys ( page 8).
H
Press the callback key to accept the call.
H
Press the callback key again to end the second call and to
return to the first call.

Using open listening / hands-free

Switching open listening on/off
The persons present in the room can listen to the call over the speaker.
During the call using the handset:
@
Press the hands-free key to switch open listening on or off.
When the speaker is switched on and the handset is picked up, open lis-
tening is switched on. In this case, the hands-free microphone is
switched off.
When the speaker is switched on and the handset is in the cradle, hands-
free via the hands-free microphone is switched on.
@ &
Switching from open listening to hands-free:
Replace the handset while holding down the hands-free
key.
Switching hands-free on/off
You can also make a call via the microphone with the handset in the cra-
dle. The optimum distance from the microphone is approx. 50 cm.
@ &
Switching on hands-free during a call
Replace the handset while holding down the hands-free
key.
I
(not at 1st digit).
£
2368).
page 13).
page 11) the VIP symbol flashes in the
7