ICS 680ES Manual De Mantenimiento página 31

680ES SERVICE MANUAL
8.14
Wind the recoil spring.
A. Line rope up with notch on pulley.
B. Rotate the pulley with the rope
clockwise 5 times.
C. Untangle rope and release.
8.15
Assemble starter cord shield.
8.16
Remove starter pawl screws, pawls,
spring and plain washer.
NOTE: Piston stop tool may be required
to remove the starter pawl screws.
8.17
Inspect and clean pawl components.
A. Inspect the components. Replace if
necessary.
B. Clean the components with a brush
and solvent.
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020
8. STARTER
31