Using your SteriShoe
®
The SteriShoe® ultraviolet shoe sanitizer will not work if:
■ You use it in a shoe without heel support. The
SteriShoe® shoe sanitizer must be compressed to
operate. (See instructions for using the SteriShoe®
shoe strap on the opposite page.)
■ It detects ambient light. The provided shoe bag must
be used to darken the shoe environment.
Just like you give your feet a break, give your SteriShoe®
shoe sanitizer a break too. Allow your SteriShoe® shoe
sanitizer to rest for at least fifteen minutes between uses.
11
device
Using your SteriShoe
®
1. Insert opened strap through the
SteriShoe ® shoe sanitizer handle (with
the Velcro material facing outward)
2. Insert strap through the d-ring on the
end of the SteriShoe ® strap.
3. Push the heel of the SteriShoe ® shoe
sanitizer forward.
4. While pushing the heel forward,
tighten the strap and secure it with the
Velcro.
5. Plug in your shoe sanitizers, insert
them into the SteriShoe ® shoe bags
and turn them on.
DO NOT allow the shoe strap to go
between the front halves of your
SteriShoe ® sanitizer. For use with shoes
where this will occur, reverse the shoe
sanitizers (i.e. use the right in the left
shoe and the left in the right shoe) to
prevent this issue.
shoe strap
12