Scale & Resolution - Stanley Compulevel Guia Del Usuario

47855 CompuLevel
Scale & Resolution
SCALE
You can choose any of six scales measuring elevation with
COMPULEVEL TM
4) feet and inches, 5) centimetres, 6) meters.
To choose a measurement scale:
Press and hold the SCALE key for two seconds. Continue pressing the
SCALE key to sequence through all the scales. Release on the desired
scale. The current scale is indicated on the right side of the display
window.
RES
You can choose one of three level's of resolution or measurement
precision in which to work with COMPULEVEL
precision but requires longer for a reading to stabilise. Res 2, provides
intermediate precision and takes less time to obtain a stable reading.
Res 5, is best for rough measurements and provides the fastest readings.
To choose the preferred resolution:
Press and hold the RES key for two seconds to enter and continue
pressing to select the desired measurement resolution. The current
resolution level (ie. 1/8", 1/4" or 1/2" when using inch scales) is shown
on the display window.
Release the RES key at the desired value.
TYPICAL DISPLAY
Time for reading
to stabilise
6/11/07 11:14
: 1) fractional inches, 2) decimal inches, 3) feet,
Right end of display
(Decimal inches display)
Longer
Shorter
Page 10
TM . Res 1, offers the highest
Fractional inches
Decimal inches
Feet
Feet – Inches
Centimetres
Meters
EQUIVALENT
DISPLAY
READINGS
Use for highest precision
Use for intermediate precision
Use for rough measurements
Compulevel TM Measurement system • 10