Configuration "Con; Default - Factory Settings - Macurco CX-6 Instrucciones Para El Usuario

Macurco CX-xx Operation Manual

4.5 Configuration "CON"

To change the settings, remove the Philips screw on the front of the CX-xx. Pull off the front cover of the unit. Locate
the MENU and ENTER buttons on the top left of the board.
4.5.1 Default – Factory Settings
The CX-xx comes pre-programed with the following default settings:
To reset the device to factory settings, see section 4.5.2 Select Default Configuration – "dEF".
REV – 1.1
Figure 4–1 - Board View
Setting Description
Power Up Test
Display
Buzzer
CO Alarm Relay Setting
NO Alarm Relay Setting
2
Alarm Relay Configuration
CO Fan Relay Setting
NO Fan Relay Setting
2
Fan Relay Delay
Fan Relay Minimum Runtime
Fan Relay Latching
Trouble Fan Setting
4-20 mA
4-20 mA mode
CO Calibration Period
NO Calibration Period
2
[34-2900-0512-0 ]
Display Default Setting
PUt On
dSP On
bUZ On
ArS.C 200
ArS.n 5
Arc nO
FrS.C 35
FrS.n 2.5
Frd 3
Frr 0
FrL OFF
tFS OFF
420 bAS
420.n dUAL
CAL.C diS
CAL.n diS
24 | P a g e