Idiomas disponibles
Idiomas disponibles
. Socket wrench
. Bolt
. Pan head screw
. Adjusting plate
. Planer blade locating lugs
. Gauge plate
5. Heel of adjusting plate
6. Set plate
7. Inside flank of gauge plate
8. Gauge base
9. Back side of gauge base
0. Mini planer blade
. Mini planer blade
. Groove
. Set plate
4. Hex. flange head bolt
5. Drum plate
6. Drum
. Remove the existing blade, if the tool has
been in use, carefully clean the drum surfaces
and the drum cover. To remove the blades on
the drum, unscrew the three installation bolts
with the socket wrench. The drum cover comes
off together with the blades.
. To install the blades, loosely attach the
adjusting plate to the set plate with the pan
head screws and set the mini planer blade on
the gauge base so that the cutting edge of the
blade is perfectly flush with the inside flank of
the gauge plate.
. Set the adjusting plate/set plate on the
gauge base so that the planer blade locating
lugs on the set plate rest in the mini planer
blade groove, then press in the heel of the
adjusting plate flush with the back side of the
gauge base and tighten the pan head screws.
4. It is important that the blade sits flush with
the inside flank of the gauge plate, the planer
blade locating lugs sit in the blade groove
and the heel of the adjusting plate is flush
with the back side of the gauge base. Check
this alignment carefully to ensure uniform
cutting.
5. Slip the heel of the adjusting plate into the
groove of the drum.
6. Set the drum cover over the adjusting plate/
set plate and screw in the three hex flange
head bolts so that a gap exists between the
drum and the set plate to slide the mini planer
blade into position. The blade will be positioned
by the planer blade locating lugs on the set
plate.
7. The blade's lengthwise adjustment will
need to be manually positioned so that the
blade ends are clear and equidistant from the
housing on one side and the metal bracket on
the other.
5
