Idiomas disponibles
Idiomas disponibles
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off
and unplugged before adjusting or checking
function on the tool.
Adjusting depth of cut
Depth of cut may be adjusted by simply turning
the knob on the front of the tool.
. Knob
Switch action
. Lock button
. Switch trigger
CAUTION:
• Before plugging in the tool, always check to
see that the switch trigger actuates properly
and returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger.
Release the switch trigger to stop.
For continuous operation, pull the switch trigger
and then push in the lock button.
To stop the tool from the locked position, pull
the switch trigger fully, then release it.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off
and unplugged before carrying out any work on
the tool.
Removing or installing planer blades
CAUTION:
• Tighten the blade installation bolts carefully
when attaching the blades to the tool. A loose
installation bolt can be dangerous. Always
check to see they are tightened securely.
• Handle the blades very carefully. Use gloves
or rags to protect your fingers or hands when
removing or installing the blades.
• Use only the TAKIMA wrench provided to
remove or install the blades. Failure to do so
may result in overtightening or insufficient
tightening of the installation bolts. This could
cause an injury.
