Teka HLB 8510 P Manual Del Usuario página 37

OVEN TIMER FUNCTION
Programming the Buzzer
1. Press or
the screen and press
displayed on the screen.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time
has been set and the clock will start count-
ing down from the selected time. Symbol
flashes slowly.
3. Once the time has expired, an acoustic sig-
nal will sound for 90 seconds and symbol
will flash quickly.
NOTE
With the Buzzer function, the oven will not
turn off when the time expires.
4. Push any key to stop the alarm. Symbol
will then disappear.
If you wish to modify the time on the buzzer, re-
peat the steps shown. Upon entering the timer
control, the time currently remaining will appear,
which you will be able to adjust.
NOTE
With the Buzzer function, the remaining time
will show permanently on the display. With
this programmed function, it is not possible
to view the time or the total programmed
cooking time.
Programming Cooking Time
1. Press
or
the screen and press
displayed on the screen.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time
has been set and the clock will start count-
ing down from the selected time. Symbol
flashes slowly.
3. Select a function and a cooking tempera-
ture using the oven commands.
until symbol flashes on
. The time 00:00 is
or
until symbol flashes on
. The time 00:00 is
or
4. Once the cooking time is up, the oven will
turn off, an alarm will sound and symbol
will flash quickly.
5. Press any key to stop the alarm and turn off
symbol
6. Set the controls to position
the oven.
. You
You can change the remaining cooking time at
any time by pressing
starts to flash quickly. Now press
the time.
NOTE
With the Cooking Time function, the remain-
ing time will be permanently displayed on the
screen. You cannot see the current time on
the display when this function is set.
Programming the Cooking Stop Time
1. Press
the screen and press
current time on the timer display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time
has been set and the clock will start count-
ing down from the selected time. Symbol
flashes slowly.
3. Select a cooking function and temperature.
4. When the cycle is finished, the oven will
turn itself off, a buzzer will sound and sym-
bol will flash quickly.
5. Press any sensor to stop the alarm and to
turn off symbol
again.
6. Set the controls to position
the oven.
You can change the remaining cooking time at
. You
any time by pressing
starts to flash quickly. Now press
the time.
Programming Cooking Time and Cooking
Stop Time
1. Press
. The oven will switch on again.
or until symbol
or until symbol
. You will see the
. The oven will switch on
o until symbol
or until symbol
User Guide
English
to turn off
to change
flashes on
or . You
to turn off
to change
flashes on
37