Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Speedaire Operating Instructions and Parts Manual
Speedaire
E
Operation
N
(Continued)
G
L
BEFORE EACH START-UP:
I
1. Place On/Auto/Off lever
S
to "OFF".
H
2. Pull regulator knob out,
turn counterclockwise
until it stops. Push knob
in to lock in place.
3. Attach hose and acces-
sories.
NOTE: See PORTABLE
"QUADRAPORT" CONTROL
PANEL paragraph in the
Installation section of this
manual.
NOTE: The hose or accessory
will require a quick connect
plug if the air outlet is
equipped with a quick con-
nect.
Maintenance
CUSTOMER
RESPONSIBILITIES
Check Safety Valve
Drain Tank
Air Filter
Air compressor pump intake and
exhaust valves
(1) more frequent in dusty or humid conditions
®
"Site Boss" Air Compressor
air pressure causes a haz-
ardous risk of bursting.
Check the manufacturer's
maximum pressure rating
for air tools and acces-
sories. The regulator out-
let pressure must never
exceed the maximum
pressure rating.
HOW TO START:
1. Turn the On/Auto/Off
lever to "AUTO" and
allow tank pressure to
build. Motor will stop
when tank pressure reach-
es "cut-out" pressure.
Before
each
use
G
2. Pull the regulator knob
Too much
NOTE: Always operate the
air compressor in well-venti-
lated areas free of gasoline
or other combustible vapors.
If the compressor is being
used to operate a sprayer
DO NOT place near the spray
area.
Daily or
Every
Every
after
40
100
each
use
hours
hours
G
G
G
1
14
1WC94
out and turn clockwise to
increase pressure. When
the desired pressure is
reached push knob in to
lock in place. The com-
pressor is ready for use.
Yearly
G
Tabla de contenido
