Gac Polishing Filter Replacement (Pqc5Ro Only) - PUR PQC3RO Manual Del

GAC Polishing Filter Replacement (PQC5RO only):

1. Turn off the Inlet Valve.
2. Close the Ball Valve of the Storage Tank.
3. Open the RO Faucet to release the
pressure in RO system.
Removing the Expired GAC Polishing Filter:
1. Remove the Blue Horseshoe Clip securing the 1/4" Blue Tubing in the quick-connect on the expired GAC Polishing Filter. Then
disconnect the Blue Tubing by pushing in the Collet and pulling out the Blue Tubing.
2. Repeat the same procedure to remove 1/4" White Tubing from the other end of the GAC Polishing Filter.
3. Pull off the expired GAC Polishing Filter from the plastic Filter Mounting Brackets that are attached to the metal Filter Housing
Bracket.
Installing the New GAC Polishing Filter:
1. Remove the outer packaging from the new GAC Polishing Filter. Place the new Filter onto the plastic Filter Mounting Brackets.
2. Connect the 1/4" Blue Tubing back into the outlet of the Filter. Replace the Blue Horseshoe Clip to secure the Tubing.
3. Connect the 1/4" White Tubing into the inlet of the Filter. Replace the Blue Horseshoe Clip to secure the Tubing.
4. Follow steps 7 - 8 of "Periodic System Maintenance" on page 11.
13
Water
Inlet
1/4"
White
Tubing
Filter Housing Bracket
Flow Direction
GAC Polishing Filter
Water
Outlet
1/4"
Blue
Tubing