INSTRUCTION MANUAL
J
.P. SELECTA s.a.u.
CODE 80357 REV A
1. General information
•
Handle the parcel with care. Unpack and check that the contents coincide with
the packing-list. If any part is damaged or missing, please advise the distributors
immediately.
•
Do not install or use the equipment without reading this handbook first. This
instruction manual must be attached to the equipment and must be available for
all users.
•
If you have any doubts or enquiries, contact with J.P. SELECTA's technical
service.
•
Do not use the equipment in explosive, flammable or corrosive atmospheres.
2. Packing list
PERCOM N-M II Pump (with head)
Instructions manual
3. Accessories
Remote Control Pedal
4. Technical specifications
Model:
Speed range:
Speed resolution:
Control method:
External control:
Communication:
Power supply:
Consumption:
Working conditions:
Drive dimensions (LxWxH):
Pump weight:
IP rate:
4.1 Main Functions and Features
•
Control speed through a keypad. Manually control the rotating speed or au-
tomatically by an external control interface. It is easy to operate.
•
Match with a dispensing controller to achieve the filling function.
•
Fill and empty key that activate the motor at maximum speed.
•
High torque, low power loss and a good adaptability.
•
Drive circuit has an excellent performance, a good radiating condition, a low
working noise and a stable running. It has a memory function to automatically
store the running parameters in time.
•
It is not suitable for outdoor application.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
OCT/2018
(It can be modified without notice)
Page: 10
3001301
80357
1001045
3001301
0.5-350rpm, reversible
0.1rpm (1-100rpm); 1rpm (100-350)
Membrane keypad
TTL level control start/stop & change
direction
0-5V/0-10V/4-20mA control speed
RS232/RS485 interface. Support
standard MODBUS communication
protocol
AC 220 ±10%, 50Hz/60Hz
<50W
Temperature 0-40ºC
Relative humidity < 80%
208 x 131 x 194
4.4Kg
IP31
Tel 34 937 700 877 Fax 34 937 702 362