Description Of The Device; Installation - Mark SIDIUS LED 80 Instrucciones De Usuario

EN

DESCRIPTION OF THE DEVICE

Features
> High power 75w white led
> 50000 hours lifetime and lower power consumption
> 15 or 19 DMX channel in optional
> Beam angle 12 degree, 40500Lux at 1m
> 540/630 degree PAN and 270 degree tilt movement
> 1 Color wheel with 8 diachronic colors plus open
> 1 Rotated gobo wheel with 7 rotated interchangeable gobos plus open.
> Rotated 3 facet prism with speed adjustable and variable direction
> Infinite electric focus with 2m range, and linear Iris, and shutter with variable speed
> 0~100% linear dimmer and 1-18 times/sec high speed electronic strobe
> DMX512, master-slave and sound activated controllable and auto with 8 built-in programs

INSTALLATION

Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
IMPORTANT!OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating
working load limits, installation material being used, and periodic safety inspection of all installation
material and the projector. If you lack these qualifications, do not attempt the installation yourself, but
instead use a professional structural rigger. Improper installation can result in bodily injury and or
damage to property. The projector had to be installed out of the reach of people
DANGER OF FIRE! When installing the device, make sure there is no highly-inflammable
material(decoration articles, etc.)within a distance of min.0.5m.
DMX 512 connection/ connection between fixture
The wires must not come into contact with each other, otherwise the fixture will not work at all or
properly. Please note the starting address depends upon which controller is being used. Only use a
DMX cable and 3-pin XLR-plugs and connectors in order to connect the controller with the fixture or one
fixture to another
Connection with the mains.
SIDIUS LED 80 User Manual/Manual de uso Pag 3