Pleasant Hearth OFW088RC Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
3. Attach the support ring (J) to the legs (I) using
four M6 x 18mm bolts (CC). Secure with a
screwdriver but do not tighten at this time.
Hardware Used
CC M6 x 18mm Bolt
4. Lay the slate top (H) upside down on the floor
on a carpet or blanket to avoid scratching. Attach
the legs (I) to the slate top (H), using eight M6
nuts (EE). Tighten all screws (including screws
from step 3) with a screwdriver and the wrench
(FF).
Hardware Used
EE M6 Nut
Wrench
FF
5. Turn the slate top assembly right side up. For
firepit use, put the bowl (F) onto the slate
top assembly, then put the wood grate (E) into
the bowl (F). Put the mesh cover (B) onto the
bowl (F). Keep the poker (K) near the fire pit
for use anytime.
3
x 4
4
x 8
5
F
5
I
J
EE
B
E
CC
I
H
K