Maintenance - Coral UV Serie Manual De Usuario

MAINTENANCE

CHAMBER MAINTENANCE
1.
Unplug the machine.
2.
Use a damp cloth or paper towel to wipe the walls inside the chamber
to remove any residues.
3.
Wipe with a dry cloth to ensure no marks or dust are left behind in the
chamber, as they can negatively affect sanitation.
ATTENTION: Do not wipe the LED cover with water. Wipe with a
dry cloth only. Do not use chemicals to clean the product.
REPLACEMENTS
Replace the HEPA Filter every 5-6 months if used daily.
•
1.
Unplug the machine and locate the HEPA filter on the back of the
product.
2.
Insert a coin or flat object into the guiding arrow and turn it to the
unlock position.
3.
Remove the old filter and insert the new HEPA filter.
4.
Turn the guiding arrow back to the locked position to secure the filter.
ATTENTION: Do not clean or reuse the HEPA filters. Only insert
approved HEPA filters from Coral UV. Dispose used filters
according to your local regulations.
Do NOT attempt to replace UV-C LED bulbs. Do not disassemble or
•
repair the product by yourself. Failure to follow this requirement will void any
warranty. Contact [email protected] for all servicing requests.
Do not store this product outdoors, in an extreme hot or cold environment or
•
in an environment not suitable for electrical appliance storage.
8