Custom Panels - Sub-Zero IW-30 Guia De Instalacion

PANE L I NS TA L L AT I O N

Custom Panels

Custom door/drawer panels and handle hardware must
be installed. Stainless steel panels are available through an
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
The thickness of the custom panel can vary. A minimum
5 / " thick panel is required, but the thickness can be
(16)
8
increased provided it does not exceed the maximum panel
weight indicated in the chart below. The depth of each
model is 24" . Allow for panel thickness when planning
(610)
the finished opening depth.
PA N EL REQ U IREM ENTS
WE IG H T PE R PA NE L
Door (column model)
Door (tall model)
Drawer
PA N EL TH I CK N ES S
All Panels
10 | Sub-Zero Customer Care 800.222.7820
Reveals between panels can vary,
CAUTION
When installing a panel thicker than 1"
door stop may be required to prevent damage to the
unit and adjacent cabinetry.
CAUTION
As reveals between cabinetry and the unit decrease,
severe finger pinching can occur while the door is
closing.
Finish all sides of the custom panels. They will be visible
M A X
35 lb
when the door is open.
(16 kg)
25 lb
(11 kg)
D-style handles are recommended. Locate the door handle
15 lb
(7 kg)
near the edge of the panel opposite the hinge and centered
MI N
top to bottom. Locate the drawer handles near the top edge
5 / "
(16)
8
of each panel. Stainless steel tubular and pro handles are
avail able through an authorized Sub-Zero dealer. For local
dealer information, visit the find a showroom section of our
website, subzero.com.
1
/ " reveals are typical.
(3)
8
, the 90°
(25)