Operation; Temperature Adjustment; Maintenance And Care - ELBER BT Manual De Instrucciones Y Garantía

17 OPERATION

The water cooler has a R134a ecological gas cooling system and 12 or 24
VDC compressor. It is powered by the vehicle's own battery.
It has a reservoir with capacity that varies according to the model purchased.
The water that is consumed is being replaced by another one, through the
supply connection. The compressor is activated by the thermostat that
regulates the temperature, keeping the water between 6 ° C and 15 ° C.
After freezing, the thermostat that regulates the temperature will automatically
turn the compressor off and on again, maintaining the temperature as set, and
saving battery power.

18 TEMPERATURE ADJUSTMENT

Temperature regulation is done at the thermostat.
We recommend using the thermostat in position 4. For colder temperatures,
use the thermostat in positions 5 to 7.
The lower the temperature programmed in the thermostat (the colder), the
longer the water cooler will run and therefore the higher battery consumption.
Attention: colder temperatures can freeze the water in the reservoir. This
inhibits or makes it difficult for water to escape, and decreases the capacity
of the reservoir.

19 MAINTENANCE AND CARE

8.2 For better use of the drinker and battery saving:

Always try to fill the water cooler before traveling, so while it is running
there will be no problem with battery consumption.
Temperatura máxima (mais frio)
Temperatura mínima (menos frio)
13