Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation Of The Mix Master
Use a 3-prong, grounded, 110-volt power connection for safe operation. The line should be
at least 14 gauge.
To mix concrete, add water, concrete and aggregate while mixing drum is rotating.
When tilting the drum to discharge the mixed concrete, do so slowly. It is
important to discharge smoothly, this keeps the machine balanced and upright.
Discharge the mixed concrete by elevating the tilting handle while the drum is rotating.
The ON/OFF switch in the motor of the Mix Master mixer provides thermal protection to the
motor in the event of overheating. Should your motor shut off automatically, turn off the unit
and unplug it for 15 minutes. This allows the motor to cool. After the cooling period, plug in
the motor and press the start switch. If the motor does not restart and continue to run,
contact your Felker representative.
Maintenance
Always unplug the Mix Master from its power source before any cleaning or
maintenance functions are performed.
When spraying the Mix Master with water, do not direct the water onto the motor
or the ON/OFF switch assembly.
NOTE:
• Clean the mixer after each use and do not allow concrete to build up on any portion of
the mixer.
• Change the gear-box oil approximately every 3000 hours of operation using
SAE 40 oil.
Keep all moving parts lightly greased.
Keep the electric motor cooling fins clean and free of debris.
9
Tabla de contenido
