Compressed Air - 3D Systems ProX DMP 200 Guía De Requisitos Para La Instalación

PÓSTER DE REQUISITOS PARA LAS INSTALACIONES
18
Gas
Gas ProX DMP 200
Tipo de conexión Toma de acoplamiento rápido, diámetro interno 6 mm
Fabricación: de 5 a 10 l/min (0,17 a 0,35 pies cúbicos por minuto)
Tasa de flujo
Purga: 30 l/min (1,06 pies cúbicos por minuto)
Presión de
Mínimo 4 bar (58 psi) - Máximo 6 bar (87 psi)
suministro
Nitrógeno: 99,99 %
Calidad
Argón: 4,8 o superior
Bulk gas tank
1
▪ Nitrogen : 99.99% pure nitrogen
▪ Argon : Quality 4.8
Gas cylinders
2
▪ Nitrogen : 99.99% pure nitrogen
▪ Argon : Quality 4.8
▪ Connect cylinders with auto-switching
manifold to ensure constant gas
supply during build
3D SYSTEMS, INC.
A/C
Air Conditioning
• required
• do not install vent directly above process station

Compressed Air

Aire comprimido
Tipo de conexión Toma de acoplamiento rápido, diámetro interno 6 mm
Tasa de flujo 50 l/min (1,76 pies cúbicos por minuto)
Presión de
Mínimo 6 bar (87 psi) - Máximo 8 bar (116 psi)
suministro
Calidad Clase 4,4,4 según ISO 8573-1:2010
Atmosphere
max
30° C (86° F)
min 15° C (59° F)
Room temperature
setpoint and stability
• set temperature between 20° C and 25° C (68° F and 77° F)
• temperature should be constant to ±5° C (± 9° F)
ProX DMP 200
Note : the painting pipe colors are only for indication, and might not fit with your local, state and federal regulations.
Always refer to the pipe color coding standards of your local, state and federal regulations.
17
Network connection
• recommended
Control Cabinet
power panel
Compressed Air
• 400 VAC*
• customer supplied/installed
• 50/60 Hz
• 8 kVA
• 3ph + PE
Argon * Supporting also 480VAC. Required
wiring modification during installation.
• customer supplied/installed
Room oxygen monitor
• recommended
• customer supplied/installed
• safety interlock contact rating: 10 A
PN: 80-D45-ES Rev A