Haier HSR3918FI Serie Manual Del Usuario página 39

EN
1. Cut the pipe into two pieces with the required
(B1) and the water tap (B2) (Fig. 10.5-1). Make sure
to get a square cut by using a sharp knife.
2. Insert pipe (B1) approx. 12 mm deep into the
3. Secure the pipe with a locking clip (C) according to
Fig. 10.5-3.
4. Repeat step 2 and 3 with the pipe (B2) on the other
5. Connect the end of pipe (B2) to one of the adapters
"D" or "E and F" which suits to the water main (Fig.
10.5-4).
6. Remove the plug in the valve at the back of appliance
(Fig.10.5-5).
Connect the end of B1 to the valve at the back of
7.
the appliance (Fig. 10.5-6).
8. Open the water tab to check if the system is leak
WARNING!
Ensure that the connections are always firm, dry and
leak free.
Make sure the hose is never crushed, kinked, or twis-
ted.
10-Installation
F
A
B1
10.5-3
B1
A
C
3/4" 1/2"
D
B2
10.5-1
E
1/2"
D
B2 3/2"
10.5-2
B1
A
10.5-4
E
F
10.5-5
10.5-6
35