GreenWorks 2500600G Manual Del Propietário página 18

MAInTEnAnCE
REPLACING THE TINES (See Figure 9)
• Remove the tine cartridge as demonstrated on page 16.
• Secure tine cartridge on a workbench.
• Push out the pin using a screwdriver (Not Supplied). This may require the use of a rubber
mallet if more strength is required.
• Remove and discard the worn/broken tines.
• Replace the tine into position and slide the pin back into place pressing the pin against a solid
surface to pressure it back into place.
Spring
Pin
16
Fig. 9