Operation Instructions - Smartpond 52291 Manual De Instrucciones

OPERATION INSTRUCTIONS

Step 1. If using the clear lenses,
skip to step 3. If you would
like to use the colored lenses,
rotate the lamp retaining ring
counterclockwise to remove the
clear lenses.
Step 2. Make sure the o-ring
sits in the groove as shown
and insert the colored lenses
you desire to use. Attach the
lamp retaining ring by rotating
clockwise, and make sure that it
is secure.
Step 3. Connect the sensor to
the transformer and the sensor
to the lights by pushing the plug
into the sensor socket and hand
tighten the nut around the plug
and socket to secure.
Step 4. Place the lights in or out
of the water. Make sure that the
transformer and sensor are not
submerged and the sensor is
facing up.
NOTE: At night, the lights will
automatically turn on. At sunrise,
they will automatically turn off.
Step 5. Plug the transformer into
a properly grounded electrical
outlet.
4 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
1
GFCI
outlet
2
3
4
5