Technical Specifications; Equipment Disposal; Service Information; Routine Maintenance - Klark Teknik DN9610 AES50 Manual Del Usuario

6. Technical Specifi cations
© 2012 MUSIC Group IP Ltd. Technical specifi cations and
appearances are subject to change without notice and accuracy is not
guaranteed. MIDAS and KLARK TEKNIK are part of the MUSIC Group
(music-group.com).
DN9610 general specifi cations
Dimensions
Net weight
Shipping weight (gross)
Power requirements
Power consumption
Operating temperature range
Storage temperature range
7. Troubleshooting
If blue power LED is extinguished when power is being applied to the
unit, this indicates either a problem with the power adaptor or an
internal problem with the unit. If power adaptor is OK, the unit may
be faulty. Please see the LIMITED WARRANTY information at the front
of the manual.

8. Service Information

This section gives you servicing information for your unit.
If you are in any doubt or have queries about any of the procedures in
this section, contact Klark Teknik Technical Support. Contact details
can be found at the front of this manual.

8.1 Routine maintenance

To help keep your unit in good working order and to make sure it gives
you optimum performance, we recommend that you carry out the
following every month.
• •
Clean the unit using a dry, lint-free cloth. Don't use harsh
abrasives or solvents.
• •
Check the functionality of the LEDs.
• •
Check the functionality of the equipment.
Length = 141 mm (5.6")
Depth = 104 mm (4.2")
Height = 60 mm (2.35")
0.77 kg
Single unit = 1.10 kg
10 units = 12.00 kg
Voltage = +9V to +18V DC
83mA single channel
166mA both channels
+5° C to +40° C
-20° C to +60° C

8.2 Equipment disposal

When this equipment has come to the end of its useful life, its
disposal may come under the DIRECTIVE 2002/96/EC OF THE
EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on
waste electrical and electronic equipment (WEEE).
Hazardous substances in WEEE contaminate water, soil and air and
ultimately put at risk our environment and health. The directive aims
to minimize the impacts of WEEE on the environment during their life
times and when they become waste.
The WEEE directive addresses the disposal of products when they
have reached the end of their life and contributes to the reduction of
wasteful consumption of natural resources. This will help to reduce
pollution, and protect the environment and ourselves.
If this equipment carries a 'crossed-out wheelie
bin' (shown left), please do not dispose of
WEEE as unsorted municipal waste but collect
and dispose of in accordance with local WEEE
legislation. The horizontal bar underneath
indicates that the product was placed on the EU
market after 13th August 2005.
For WEEE disposal, see our website at klarkteknik.com for
information.
User Manual 11
klarkteknik.com