Grounding Instructions - Danby Designer DDMW1060BSS-6 Manual Del Propietário

IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY
(a) Do not attempt to operate this oven with the door open since open-
door operation can result in harmful exposure to microwave energy. It is
important not to defeat or tamper with the safety interlocks.
(b) Do not place any object between the oven front face and the door or
allow soil or cleaner residue to accumulate on sealing surfaces.
(c) Do not operate the oven if it is damaged. It is particularly important
that the oven door close properly and that there is no damage to the: (1)
door (bent), (2) hinges and latches (broken or loosened), (3) door seals and
sealing surfaces.
(d) The oven should not be adjusted or repaired by anyone except properly
qualifi ed service personnel.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance is equipped with a cord that has a grounding wire with a grounding plug.
The power cord must be plugged into an outlet that is properly grounded. If the outlet is a
standard 2-prong wall outlet, it is your responsibility to have it replaced with a properly
grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency
the appliance is designed for.
WARNING - Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualifi ed electrician or service agent if the grounding instructions are not
completely understood, or if doubt exists as to whether the appliance is properly grounded.
Do not connect your appliance to extension cords or together with another appliance in
the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or
remove the third ground prong from the power cord.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similar qualifi ed person in order to avoid hazard.
Have a qualifi ed electrician install a grounded outlet near the appliance if the power cord is
too short.
A short power supply cord is provided to reduce the risks resulting from becoming
entangled in or tripping over a longer cord.
SAVE THESE INSTRUCTIONS!