Warranty - accesus PAF185 Manual Del Usuario


at least once a year, after each 12 months of use,
personal fall protection equipment must be withdrawn
from use to carry out periodic detailed inspection.
Periodic inspection can be carried out by a properly
trained
and skilled person.
Periodic inspections can be carried out also by
manufacturer of the equipment or his authorized
representative, or an authorized company. Inspect in
detail all accessible elements of the equipment paying
attention to any damages, excessive wear, corrosion,
abrasion, cutting or incorrect function (see the above
item.) In some cases, if the fall protection equipment
has a complex design (e.g. fall arresters), periodic
inspections can be carried out by manufacturer of the
equipment, or his authorized representative only. After
the periodic inspection, date of the next inspection
should be defined.

regular periodic inspections are essential in respect of
the equipment condition and safety of users which is
dependent on functionality and durability of the
equipment.

during periodic inspection it is necessary to check the
legibility of all markings on the equipment (identity
label of the device).

all information on fall protection equipment (name,
serial no., date of purchase and date of first use, name
of user, information on repairs and inspections and
withdrawal from use) must be provided in the Identity
card of the device. It is responsibility of user's
organisation to provide the Identity card and to fill in
the required details. The Identity Card should be filled
in by a person responsible for protective equipment. It
is forbidden to use personal fall protection equipment if
the Identity Card is not filled in.

if the equipment is re-sold outside the original country
of destination the reseller must provide instructions for
use, for maintenance, for periodic inspection and for
repair in language of the country where the product is
to be used.

personal fall protection equipment must be withdrawn
from use immediately if any doubts arise in regard of
its condition, or proper operation. The equipment must
not be used until manufacturer of the equipment
carries out a detailed inspection and gives his written
consent to use the equipment again.

personal protection equipment must be withdrawn
from use immediately and destroyed if it has been
used to arrest a fall.

full body harness is the only admissible device to be
used to support the user's body in personal fall
protection equipment.

in full body harness use only attaching points (buckles,
loops) marked with capital letter "A" to attach a fall
protection system.
8.

Warranty

The manufacturer grants a warranty for 12 months from
the date of purchase of the device. If a defect is found in any
part,
and guarantee period for this part is extended by the time of
the
repairs
and effective removal of the defect found.
The warranty covers:

Defects in material,

Structural defects,

Anti-corrosion coating defects
In order to keep the warranty, it is necessary to follow
procedures of periodic inspections specified in item 4 of the
Instruction manual.
warranty
Page 4 of 5