Care And Maintenance - Pleasant Hearth L32-50 Manual Del Usario

OPERATING INSTRUCTIONS
LCD on/off control: The LCD display may be
1
switched on and off indepenently of the heater
functions by using the LCD on/off button as shown
on the remote control.
Scene select buttons: The appliance is pre-
2
programmed with nine different scenes as shown.
These scenes have been specially edited to run in
a seamless loop. When the appliance is switched
on, the log fire scene will automatically run. To
select a different scene, press the appropriate
scene select button to choose the desired scene.
During normal operation the footage may occasionally
appear to 'freeze' for a fraction of a second. This
happens as the scene is recycled to loop again.
This is perfectly normal and should be no cause for
concern.
Volume up, down and mute button: Some of the
3
LCD scenes include sound effects. These buttons
raise and lower the volume. The mute button mutes
the speakers. While the speakers are muted, a
symbol will be displayed on screen.
Press again to de-activate.

CARE AND MAINTENANCE

Before attempting ANY maintenance:
1. Turn off power to the unit.
2. Unplug the power cord from outlet.
3. Let the appliance cool if it has been operating.
Except for periodic dusting, there are no specific requirements for care, other than regular cleaning of
the general appliance. Wiping with a dry cloth is normally sufficient. DO NOT use abrasive cleaners
as they can damage the finish. Make sure the heater outlet grill (located on the top panel) and the air
inlet mesh grills (located on the sides and base panel) are kept clear of dirt, dust, and pet hair. These
should be vacuum cleaned periodically using a brush attachment.
GLASS FACIA PANEL - This should only be cleaned using a non-abrasive glass cleaner. Test on a
small area first.
Log fire
Gas fire
(medium)
Abstract
scene
12
Twig fire Coal fire
Gas fire Gas fire
(high) (Blue Flame)
Nature Aquarium
scene scene
1
2
3