Brandt VI320BE1 Instalación página 10

Contents
Installing your dishwasher
Levelling by adjusting the feet .................................17
Anti-condensation protection ...................................17
Facing the door ......................................................18
Balancing the door .................................................18
Building in and fixing the dishwasher .......................18
Water connections ..................................................19
Draining away the waste water................................20
Electrical connection ...............................................20-21
Foam strip and soundproofing sea ...........................21
Installing the plastic corner brackets........................21
...............................................22
Safety instructions
.........................................22
Building in under a hob
16
Pages
....................................16-22
GB
Installing your dishwasher
Remove the 2 red
protective wedges from
the front of your appliance to
avoid causing a leak.
Levelling by adjusting the feet
Ensure that your dishwasher is well
balanced and stable. The four feet can
be adjusted, so adjust them if necessary
using a screwdriver. If the feet are
poorly adjusted, this decentres the door
and makes your dishwasher wobble,
causing leaks.
For dishwashers that can be built-in,
fitted with rear feet adjustment via two
knurled knobs on the base of the
machine, at the front, use a screwdriver,
without exerting force, to finish the
adjustments to avoid damaging the
worktop.
Protecting the worktop
Glue the steam protector supplied with
your machine underneath your worktop.
Built-in appliance cup kit
(available according to the model from
After-Sales or the dealers)
To assist in sliding your dishwasher
(over rough or carpeted floors, etc.),
clip the little cups to all four feet.
GB
17