Steren SWI-108 Manual Del Usuario página 5

SPECIFICATIONS
TROUBLESHOOTING
1. The Power LED is not lit
Make sure the AC power Adapter is plugged into an outlet
properly and it's connector is plugged into the power jack of the
switch .
Make sure the power source is ON.
Make sure you are using the power adapter supplied with your
switch.
2. The Link/Act LED is not lit when a device is connected to
the corresponding port
Make sure that the cable connectors are firmly plugged into the
Switch and the device.
Make sure the connected device is turned on and its adapter is
installed correctly and is working.
The cable must be less than 328 feet long
Product design and specifications are subject to change,
without notice.
ENGLISH-5