Troubleshooting - ASG A450 Manual Del Usuario

CHARGING NIMH BATTERY
Connect the battery main charge lead to battery socket which is in the front side of the
charger.
Press and hold "BATT TYPE" button for 2 seconds to start charging. The charge status LED will
glow to indicate charging is in progress.
Always make sure you are charging NiMH battery under NiMH mode. Charging Lithium
Battery under NiMH mode can lead fire, personal injury or property damage.
WARNING:
When the battery is fully charged, the charge status LED will glow constant green. Unplug
the battery from the charger and the charge status LED will flash green which indicates the
charger is ready to charge another battery.

TROUBLESHOOTING

LED Blinking Times

 
  
   
Once the error condition has been resolved, press "BATT TYPE" button to reset the charger.
If the error can not be solved, please disconnect the power cord from the wall socket and
unplug the battery from the charger.
Problem
Polarity (+ and –) connec-
tions of battery are incorrect
Polarity (+ and –) connec-
tions of battery are incorrect
Dead cell or imbalance
between cells is too high
Over current protection
Solution
Check the connection
between the charger
and the battery.
Make sure the charge lead
is connected properly to
the charger and ensure it is
wired correctly.
Safely dispose of damaged
battery
Decrease charge rate to safe
level for the battery pack, or
dispose of shorted battery