Section 1: Gm Lan 29; Connections To Be Made; From The 16-Pin Harness - Axxess AX-ADGM100 Manual Del Usuario

Section 1: GM LAN 29

BUICK CHEVROLET (CONT)
Enclave 2008-2017 Monte Carlo
Lucerne 2006-2011 Silverado *
(new body)
CADILLAC
Silverado 2500/3500 *
DTS † 2006-2011
Suburban *
Escalade † 2007-2014
Tahoe **
SRX † 2007-2009
Traverse
CHEVROLET
GMC
Avalanche * 2007-2013
∆
Acadia
Captiva Sport 2012-2015
Acadia Limited
Equinox 2007-2009
Savana ‡
Express ‡ 2008-2015
Sierra *
Impala 2006-2013
Sierra 2500/3500 *
Impala Limited 2014-2016
* These vehicles have a digital amp option. Please reference the "Service Parts Identification" sticker located in the glove
box for the RPO code Y91. If Y91 is present, then the vehicle is equipped with a digital amplifier.
** These vehicles have a digital amp option. Please reference the "Service Parts Identification" sticker located in the glove
box for the RPO code STZ or Y91. If STZ or Y91 is present, then the vehicle is equipped with a digital amplifier.
† These vehicles are standard for a digital amplifier.
‡ For 2013-2015, if the vehicle is equipped with OE navigation, use the AXADBXH-GM4.
∆ In 2012-Up, if the vehicle is equipped with OE navigation, use the AXADBXH-GM4.
APPLICATIONS
GMC (CONT)
2006-2007 Yukon /
Yukon XL **
∆
2007-2013
HUMMER
2014
∆
H2 †
2007-2014
∆
PONTIAC
2007-2014
∆
Torrent
2009-2017
SATURN
Outlook
2007-2016
VUE
2017
2008-2015
SUZUKI
2007-2013
∆
XL-7
2014
∆
AX-ADGM100

Connections to be made

1. From the 16-pin harness:

• Connect the (2) Red wires to the ignition/accessory wire of the
aftermarket radio.
2007-2014
∆
Connect the Orange/White wire to the illumination wire of the aftermarket
•
radio. If the aftermarket radio has no illumination wire, tape off the Orange/
2008-2009
White wire.
• Connect the Blue/White wire to the amp turn on wire of the
2007-2009
aftermarket radio.
• Connect the Brown wire to the mute wire of the aftermarket radio. If the
2007-2010
aftermarket radio does not have a Mute wire, tape up the Brown wire.
2008-2010
• Connect the White wire to the left front positive speaker output of the
aftermarket radio.
2007-2009
• Connect the White/Black wire to the left front negative speaker output
of the aftermarket radio.
Connect the Gray wire to the right front positive speaker output of the
•
aftermarket radio.
Connect the Gray/Black wire to the right front negative speaker output
•
of the aftermarket radio.
4
Continued next page