OPERATIONAL INSTRUCTIONS
Press "MODE" to choose the configuration function. The following functions will be
displayed in sequence: SCAN TMR
SPEED
DIST
CAL
PUL
SCAN.
→
→
→
→
→
•TMR - Press "SET" to set the desired exercise time; each time, the value will increase
by 1:00; If "TIME" performs a countdown of the desired value until 0:00, the
computer will stop the operation and 0:00 will flash as a warning; press any key to
stop. Then, "TIME" will time from 0:00.
•SPD - This function cannot be predefined. When the user starts pedaling, the LCD
display will show the current exercise speed.
•DST - Press "SET" to set the desired exercise distance; each time, the value will
increase by 1.0 m. If "DISTANCE" performs a countdown from the desired value to
0.0, the console will stop the operation and 0.0 will flash as a warning; press any key
to stop. Then, "DISTANCE" will start counting.
•CAL - Press "SET" to set the desired calorie burn ("CALORIES"); each time, the value
will increase by 1.0cl. If "CALORIE" performs a countdown from the desired value to
0.0, the console will stop the operation and 0.0 will flash as a warning; press any key
to stop. Then, "CALORIE" will start counting from 0.
•PUL - The computer will display the user's heart rate during exercise. When you start
the exercise, you will need to hold both hands with your hands. After 6-7 seconds,
the "PULSE" icon will be displayed. If you hold with just one hand, the pulse indicator
will become unstable. To ensure more accurate pulsation, we suggest that you hold
the handles with both hands during the exercise.
Watch:
•When the exercise is interrupted for 4 minutes, the main screen turns off.
•The "STOP SIGNAL-STOP" signal will light up when the "SCAN" function is being
performed.
•When the LCD display is weak, replace the batteries.
•If there is no signal during exercise, check that the cable is connected correctly.
•If the computer's displays are abnormal, reinstall the batteries and try again.
•Spec. of batteries: 1.5V UM-3 or AA (2PCS).
47