Installing Moisture Barrier Tape; Installing Fleece Tape - Signature Kitchen Suite SKSDW2402P Manual Del Propietário

• If the cabinet panel weighs between 17.6 lb (8
kg) and 24.2 lb (11 kg), adjust the door spring
tension to make the door easier to open. See
the Adjusting Door Spring Tension section.
7 / 8 "
5 / 8 -
m )
2 2 m
( 1 6 -
"
1 / 1 6
3 0 1
/ 8 " -
m m )
2 8 3
- 7 8 0
( 7 2 0
5.5 lb (2.5 kg) ≤
You can adjust the width dimensions of the wood
panel to match the cabinet width.
Installing Moisture Barrier
Tape
Install the moisture barrier tape to the underside
of the countertop to protect the surface from
condensation when the appliance is opened.
1
Clean and dry the area on the underside of
the countertop and the sides of the cabinet
opening where the tape will be applied.
2
Remove the protective film from the tape.
3
Install the tape on the underside of the
countertop.
m m )
5 9 0
/ 4 " (
2 3 1
≤ 24.2 lb (11 kg)
4
Install the shorter pieces of tape to the sides of
the cabinet opening at the top.
NOTE
• Moisture barrier tape is included in the manual
assembly bag.
• If the countertop is made of granite or a
waterproof material, the moisture barrier tape is
not required.
• Condensation may occur on the underside or
along the front edge of the countertop when the
room temperature is low.

Installing Fleece Tape

Attaching fleece tape between the dishwasher
door and the cabinet panel will reduce the friction
when the door slides up and down.
1
Install the fleece tape close to the bracket
openings to make sure the door slides
smoothly.
2
Peel the fleece tape strips off the carrier and
attach them to the door.
5 7 / 8 "
m )
( 1 5 0 m
9 5 / 8 "
m )
( 3 4 5 m
INSTALLATION 15
8 1 / 8 "
"
6 1 1 / 1 6
m )
( 2 0 7 m
m )
( 1 7 0 m