Tabla de contenido
15.Always operate blender with cover in place.
16.When blending hot liquids,remove center piece of two-piece cover.
17.Don't switch on the appliance without any food or water.
18.Do not use appliance for other than intended use.
19.The use of attachments or accessories not included with the product are not recommended for
use as they may cause personal or property hazards or injuries.
20.This product is intended for normal domestic/household use only.
21.Cutting blades are very sharp.Handle all parts with extreme care and caution.
22.NOTE:Maximum operating time for the blender is 3 minutes.
WARNINGS:
1. This appliance is not intended for longtime operation.
2. This appliance must not operate when there's nothing in the jar.
3. Do not touch the blade when appliance in service.
4. a. This appliance shall not be used by children.Keep the appliance and its cord out of reach of
children.
b. Appliances can be used by persons with reduced physical,sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and if they understand the hazards involved.
c. Children shall not play with the appliance.
5. The appliance should be repaired by qualified professionals.
6. Swich off the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
7. a. Always disconnect the appliance from the supply if it is left unattended and before
assembling,disassembling or cleaning.
b. Care shall be taken when handling the sharp cutting blades,emptying the bowl and during
cleaning.
SAVE THESE INSTRUCTIONS
BEFORE FIRST USE
• All parts of the blender are to be thoroughly cleaned before being used for the first time.(see
Section:Cleaning).
• Take out the required length of cable from the cable tidy on the base of the blender and connect
the device to the mains supply.
ASSEMBLY OF THE GLASS JAR
Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
1. Put the rubber sealing (4) on the inner edge of the blade unit (5).
2. Put the blade unit with sealing ring and ring (10) into the cup base (6).
3. Mount the glass jar (3) onto the cup base unit and tune the cup base unit, and tune the cup base
unit in clockwise direction unit it is fixed.
4. Mount the cup with cup unit onto the base unit.
5. After putting the ingredients in the cup,fix the lid (2) onto the cup by pressing down.
6. Insert the inner cover (1) into the opening of the lid,and tune it in anticlockwise directon unit it is
locked.
7. Put the blade unit with sealing ring into the cup base (6).
8. Mount the glass jar (3) onto the cup base unit and tune the cup base unit, and tune the cup base
unit in clockwise direction unit it is fixed.
05
EN
EN
9. Mount the cup with cup unit onto the base unit.
10. After putting the ingredients in the cup,fix the lid (2) onto the cup by pressing down.
11. Insert the inner cover (1) into the opening of the lid,and tune it in anticlockwise directon
unit it is locked.
INSERTING THE GLASS JAR
1. Make sure that the blender is switched off (Switch in the '0' setting).
2. Place the jug ass'y (9) on to the motor block (7) and press down until securely engaged.
USE
1. Place the foodstuff you wish to process into the glass jar.
2. Put the lid on the glass jar and close securely.Place the measuring cap into the hole in the lid and
turn clockwise to lock.
3. Switch on the motor block:
SPEED SETTING
USE
1
for light usage with liquids
2
for more solid consistency - for mixing liquids and solid foodstuffs
M SETTING
for ice crushing & shor,powerful impulse movements(The switch does not permanently engage in
the 'M' setting.You have to hold the switch in the 'M' setting or turn it repeatedly into the 'M' setting)
After using the blender,always move the switch into the '0' setting and pull out the mains plug.
To remove the glass jar just lift it up.You do not have to rotate the glass jar to remove it.
USEFUL TIPS
• To achieve the best results when pureeing solid ingredients,place small portions into the glass jar
one by one instead of placing a large quantity all at once.
• If you are processing solid ingredients,cut them into small pieces (2-3cm) first.
• When mixing solid ingredients start off first with a small amount of liquid.Gradually add more and
more liquid through the opening in the lid.
• Always place your hand on top of the blender when you are operation the device.
• Be careful when processing hot liquids.
• For stirring solid or very thick liquid ingredients we recommend that you use the blender in impulse
mode to prevent the blades from becoming stuck.
MOTOR BLOCK
Never immerse the motor block in water.Wipe it only with a moist cloth.
SIMPLE CLEANING / RINSING OUT THE ASSEMBLED GLASS JAR
Empty the glass jar and fill it with water.Place the on the motor block and turn the switch several
times into the 'M' setting.Empty the glass jar and rinse until clean.
THOROUGH CLEANING OF THE DISMANTLED GLASS JAR
Ensure that the glass jar is completely empty before you unscrew the retaining ring.
Be careful when handling the cutting blade.All removable parts are suitable for the dishwasher.
We reserve the right to make amendments.
IM Size: 145W x 210H mm (folded) Date: 20190307
06
Tabla de contenido
