Cleaning And Maintenance - Mx Onda MX-CDP2692 Manual De Usuario E Instalacion

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
USO DE LA CAMPANA EXTRACTORA
Le recomendamos que unos minutos antes de empezar a cocinar, encienda la
campana extractora con el fin de crear un flujo de aire constante, el flujo de
aire evitará que el humo y los olores se distribuyan por las distintas estancias.
1. To turn on the extractor hood, touch button 1 (
and an acoustic warning will sound indicating that the hood is on.
2. Touch one of the three speed selection buttons 2 (
depending on the speed you want to select, low speed, medium speed or
high speed respectively. The button corresponding to the selected speed
will remain illuminated indicating the chosen speed.
3. At any time you can change the speed, simply touch the button
corresponding to the speed you want to select.
4. If you want to stop the engine but not turn off the hood, touch the button
corresponding to the chosen speed and the engine will turn off but the
hood will remain on.
5. To turn off the extractor hood, touch button 1 (
and an acoustic warning will sound indicating that the hood has been
turned off.
Range hood lighting
Regardless of whether the cooker hood is off or on, repeatedly touch button
6 (
) to turn the cooker hood lighting on or off.
Sleep timer
It is advisable that when you finish cooking, leave the extractor hood operating
for a few minutes in order to eliminate any traces of smoke and odors that
remain in the kitchen.
This extractor hood incorporates an automatic disconnection system, which
automatically switches off after 3 minutes.
With the extractor hood on and the engine running, momentarily touch button
7 (
), the illumination of this button will flash, an acoustic warning will sound
and clock 5 will show the automatic switch-off time in steps of 15 seconds, after
the time the hood will turn off automatically.
To deactivate the sleep timer and turn off the hood, touch the on / off button
1 (
).

CLEANING AND MAINTENANCE

Before cleaning, disconnect the extractor hood from the mains, turn off the
omnipolar isolation switch or unplug it from the mains socket.
8
), this button will light up
), 3 (
) or 4 (
) this button will turn off
)
Tabla de contenido
loading

Tabla de contenido