Cleaning And Heating Up; Use; Removing/Inserting Plates - ADE KG 2006 -1 Instrucciones De Operación

Use

Cleaning and heating up

Burns WARNING
− Do not touch the hot surfaces of the sandwich maker.
The device may give off a slight odour and smoke during first use. This
is harmless. Ensure there is sufficient ventilation e.g. through an open
window.
Before using the waffle iron for the first time, it is recommended to clean the device to
remove any production or packaging residues.
After cleaning, heat up the waffle iron without cooking anything in it and clean it again
after cooling down.
1. Clean the device as described in the "Cleaning" section.
2. Fully unwind the power cord.
3. Place the waffle iron on a flat, heat-resistant surface.
4. Insert the power plug into a correctly installed mains outlet and let the sandwich
maker heat up for approx. 10 minutes.
5. Unplug the power cord from the mains outlet.
6. Leave the waffle iron to cool completely. After cooling, clean the device again as
described in the "Cleaning" section.
The waffle iron is now ready for use.
Use

Removing/inserting plates

‚ The plates should be reinserted in reverse order.
‚ Make sure that the locking catches lock in to place audibly and visibly.
‚ Always use the appropriate plates for each intended purpose when using the
device.
20
Each plate is secured in place by a locking
catch in the device.
1. Push the locking catch upwards to
release the plate.
2. Open the plate away from the device
and pull it out of the casing.
3. Repeat the procedure for the second
plate.
2-in-1 waffle iron and sandwich maker