Brizo BELO 63052LF Instrucciones De Instalación página 6

3
A.
Faucet Installation - Center Mount
Remove adhesive backing on trim
A.
ring gasket (1) and press into place
on trim ring (2). Place trim ring on
bottom of spout hub. Insert supply
tubes through mounting hole in sink.
Your faucet is designed for a hole
diameter of 1 3/8" +/- 1/4" (35 mm
+/- 6 mm) and a deck thickness of
up to 3" (76 mm). Maximum deck
thickness of soap dispenser is
3" (76 mm).
77522 Rev. G
2
1
6
B.
2
4
5
Push hose (1) partially up into mounting
B.
shank (2). Install the mounting bracket
(3) and nut (4) onto the mounting shank
using wrench (5). Note 1: The wrench
provided is designed to be used
with a variety of tools: flat/Phillips
head screwdrivers, wrenches, etc.
Note 2: For thin gauge sinks (not
recommended), use the thin deck aid
(6) RP37490 (not included) as shown
for single and 3 hole installations
to help support the deck. HINT: Turn
the spout tube opposite the handle to
balance the assembly when mounting.
3
6
1