ErGear EGSS3 Manual De Instrucciones página 13

Step 8 Route Cables along the Arm
Screwdriver
[Not Included]
Secure the Cable Cover [04] to the arm [01] by
tightening the bolts [G] using screwdriver
Loosen the preassembled bolts [S] on the
arm [01] to detach the cable guide from the
arm [01], and keep the bolt for the use in
next step
04
S
Route the cables into the cable guide and
secure the cable guide by tightening the
bolts [S] using screwdriver
12