Cleaning And Maintenance - Action Activejet Selected WSS-100BPL Manual De Instrucciones Y Condiciones De Garantía

GB
Stand fan Activejet Selected WSS-100BPL

CLEANING AND MAINTENANCE:

Disconnect the fan from the power supply before cleaning. Use a slightly damp cloth (moistened with water) for cleaning. Never wash the device under
running water or immerse it in the water!
1. Disconnect the power supply, release the connector terminal on the underside of the cover, remove the front of the propeller cover.
2. Unscrew the propeller holding nut (clockwise) and remove it from the engine axis.
3. Unscrew the large nut holding the rear cover (counterclockwise) and remove the cover.
4. Put the front and rear cover in water with washing liquid for 10 minutes and then clean it with a brush. After rinsing, wipe and dry with a dry cloth.
The dust on the fan blades can be wiped with a sponge and then dried with a dry cloth.
Note: Do not use solvents or volatile chemicals for cleaning.
After cleaning and drying, fold it back together in the reverse order to the disassembly described above.
We recommend unplugging the fan from the power supply during the storm or long periods of non-use.
POSSIBLE FAULTS:
If the device is not working, first check the voltage in the power outlet. The best way to do it is to connect some other testes electrical device
to the power outlet.
Possible faults, causes, and remedies.
Fault Cause
The device does not work. 1. No power supply, no light is on.
2. It does not respond to commands
from the remote control.
Remedy
Check the power supply:
- is the power cord damaged? If yes, absolutely give the device back
to the service.
- is the cable plugged into the socket?
If not, insert the plug into the socket.
Replace the batteries in the remote control.
16
Poor output of the device. 1. Inefficient mode of operation set.
2. Foreign bodies brake the engine.
Unusual sounds coming out 1. Foreign bodies in the device.
of the device.
2. Some parts of the device are not
tightened.
WARRANTY TERMS AND CONDITIONS:
1. Activejet fans are covered by a 24-month warranty. The warranty period starts from the date of purchase of the product as shown on the proof
of purchase.
2. The warranty covers defects caused by factory-based defective materials, improper assembly (factory), manufacturing errors.
3. The warranty does not cover defects resulting from: use contrary to the purpose and recommendations of the Instruction Manual, overloading
the device leading to the damage of the engine or mechanical transmission components, making repairs on one's own or by unauthorized persons,
modifying the construction, physical and chemical damage caused by external factors, and damage caused by the improper assembly as well
as mechanical damage.
4. The warranty does not cover parts subject to natural wear during operation: thermal fuses, electrostatic brushes, V-belts, tool holders, accumulators,
working tips of power tools.
5. The nameplate of the device should be legible. The returned/claimed product should be carefully protected against damage in transit.
As far as possible, provide the product in the original packaging.
6. In order to use the warranty, visit your point of purchase with a legible proof of purchase (receipt, invoice).
7. The warranty is handled by the sole distributor and owner of the brand: Action S.A., Zamienie, ul. Dawidowska 10, 05-500 Piaseczno, Poland.
MEANING OF THE SYMBOL:
A crossed out trash bin symbol means that the device should not be disposed of in normal waste containers. It is the responsibility
of the user to hand over the used equipment to the collection points for the recycling of waste generated from electrical and electronic
equipment.
CE DECLARATION OF CONFORMITY:
The device has been manufactured in accordance with the applicable European standards, including the relevant directives and regulations in force
in the European Union for electrical products. This means that the product complies with the principles of safe use, health and environmental protection.
Stand fan Activejet Selected WSS-100BPL
Switch the unit to a stronger airflow mode.
Disconnect the fan from the power outlet!
Check that there are no hairs or threads wound on the motor axis
between the housing and the propeller.
If so, take off the front cover, the propeller, and remove it.
First, disconnect the fan from the power outlet!
Remove the foreign bodies from the fan propeller cover (basket).
Turn it on again.
First disconnect the fan from the power outlet!
Check and tighten all the screws and nuts in the unit.
Turn it on again.
17
GB