Step 1
Place the Base (2) on a protected surface to avoid scratching components
when assembling. Place 5 Star Base (2) upside down and insert Casters (1)
into the bottom of the Base (2).
Step 2
Turn the Base (2) right side up on the floor and insert Gas Lift (3) into
center hole on the Base (2).
3
Customer Service Support: 1-800-379-9773
1
2
3
2
Function Instruction
TO ADJUST SEAT HEIGHT
While seated, lean forward, lifting your body
weight from the seat. Reach underneath the
right side of chair and locate the flat-surfaced
handle. Lift the handle up slowly to allow the
chair to rise to the desired height. To lower
seat height, lift the handle slowly while seated.
TO OPERATE TILT LOCKOUT
Reach underneath the right side of chair and
locate the flat-surfaced handle. Slide the
handle all the way out (away from the seat).
When the handle is in this position, leaning
back will cause the chair to tilt backwards. To
lock the chair in the upright or vertical
position, sit upright and push the handle in
(towards center of seat).
Customer Service Support: 1-800-379-9773
Operating Instructions
8