Tabla de contenido
Idiomas disponibles
Idiomas disponibles
●
Machine should only be switched on with blade installed and shoe adjustment lever locked in place.
●
Select tools and stroke rate according to material. Take care to maintain a constant read rate.
●
Do not attempt to stop the saw blade with lateral pressure after switching off.
●
Only use genuine accessories.
●
Always use the correct supply voltage. The voltage specifications on the rating plate must correspond
with the mains voltage.
●
Do not start the saw with the blade touching any surface. The blade action will bounce the tool and may
cause body injury.
●
Allow the tool to come to a complete stop before putting it down. A running tool will jerk when the blade
tip contacts any surface.
●
Do not let anyone under the age of 18 years operate this saw.
●
Always stand to one side when operating the saw and allow the blade to come to rest naturally.
●
When cutting round wood, use clamps to prevent the work piece from turning on both sides of the blade.
●
Never use your hands to remove sawdust, chips or waste close to the blade.
●
Rags, cloths, cord, string and the like should never be left around the work area.
●
Avoid cutting nails. Inspect the work piece and remove all nails and other foreign objects before sawing.
●
Do not attempt to free a jammed blade before first switching off the machine. Do not slow or stop a blade
with a piece of wood or other objects.
The warnings, precautions, and instructions discussed in this user manual cannot cover all possible
●
conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be supplied by the operator.
Vibration Safety
This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent
physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:
1.
Anyone using vibration tools regularly or for an extended period should first be examined by a doctor and
then have regular medical check-ups to ensure medical problems are not being caused or worsened
from use. Pregnant woman or people or have impaired blood circulation to the hand, past hand injuries,
nervous system disorders, diabetes, or Raynaud's Disease should not use this tool. If you feel any
symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical
advice as soon as possible.
2.
Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk
of vibration-related injury.
3.
Wear suitable gloves to reduce the vibration effects on the user.
4.
Use tools with the lowest vibration when there is a choice.
5.
Include vibration-free periods each day of work.
6.
Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.
7.
To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop
use immediately.
Pre-Operation
Changing / Fitting a Saw Blade
Ensure the machine is unplugged from the mains power outlet before changing and
fitting a blade.
- 04 -
Tabla de contenido
