To reduce the risk of personal injury, use the battery only if it is in good
EN
working order.
Do not use the battery if any of its components are damaged.
For emergencies: Practice quickly opening the fastener on the waist
belt, loosening the shoulder straps and setting down the battery. To
avoid damage, do not throw the battery to the ground when practicing.
During Operation
WARNING!
The battery is equipped with a visual and acoustic signal.
Your ability to hear the acoustic signal may be reduced
when wearing hearing protection.
The battery is carried as a backpack.
Install the Harness
see figure 7 .
To get a digital version of the user manual or to get more product
information,scan the QR code (1) at the backside of the harness.
At the backside of the backplate (3), the height of shoulder straps can
be adjusted for customized fit.
see figure 8 .
1.The backplate is fastened to the hip belt through the pocket in the
back.
2.The shoulder straps are attached to the D-rings at the back of the hip
6
cramer.eu
belt.
see figure 6.
1.Loose strap end and the adapter can be placed in the pouch.
2.Battery pockets (with or without connector) and first aid kit pocket
can be attched to the hip belt.
see figure 11.
Insert the backpack battery in the backplate – the battery slides into the
compartment – press it down carefully until it snaps into position. The
battery and power tool are now connected together.
The backplate makes it possible to carry a backpack attachment to hold
items needed for work, or a backpack battery.
Putting on the Shoulder Straps
see figure 9.
1. An optional chest buckle can be added for extra support. It can be
stored in the pocket on the left shoulder strap.
2. Adjust the fitting by pulling the loops at the end of the shoulder
straps.
see figure 10.
Attach the trimmer pack to the shoulder straps with the buckles under
the plackets and with the hook to the D-ring at the back of the hip belt
and buckle for the side support strap.
Acoustic Signal
The battery emits acoustic signals.
A.Short beep