Nostalgia Products MTC100 Manual De Instrucciones página 8

ASSEMBLY
1. Insert the Grinder into the Chute.
2. Be sure the gasket is properly placed inside the Dispenser. Then, screw the Dispenser onto
the Chute by placing on the front and turning counterclockwise until the opening faces
down.
3. Insert the tip of the Grinder into the Base of the unit. Turn counterclockwise to lock
the Chute assembly in place. Make sure the Chute, Grinder and Dispenser are properly
assembled and affixed to the Base.
4. Place the Chute Cover over the Chute assembly.
5. Place the Bowl on top of the Chute. Insert the Plunger into the Chute and
place the Drip Tray under the Dispenser at the bottom of the Base.
6