Fuel And Oil Supply - Truper PRETUL MOT-4520P Manual Del Usuario

Fuel and
Oil Supply
Fuel Supply for the motor
• Follow the Safety Warnings for handling fuel
(see page 5).
• Lay down the chainsaw on its side so that the
fuel and oil caps face upwards.
• Wipe clean the surface of the fuel tank cap to
prevent contamination.
• Slowly loosen the fuel tank cap.
• To prevent spilling, use care to pour the fuel
CAUTION
mix into the tank. Follow the
fuel specifications (See page 3).
• Before covering the fuel tank check and wipe
clean the joints.
• Set immediately the fuel tank cap. Hand-tigh-
ten the cap.
• Wipe clean all the fuel spillage.
Oil Supply for The Bar and Cutting Chain
• Use oil specified for bars, chains and the lubrication
systems, especially formulated to perform in a wide range
of temperatures without the requisite of dilution.
• Add oil per each of fuel tank consumed.
• Do not use dirty, used or contamina-
CAUTION
ted oil. The oil pump, bar or chain may get damaged.
• Lay down the chainsaw on its side so that the fuel and
oil caps face upwards.
• Wipe clean the surface of the oil tank cap to prevent
contamination.
• Slowly loosen the oil tank cap.
• Use care to prevent spillages in the tank.
• Before covering the oil tank check and wipe clean the joints.
• Set immediately the oil tank cap. Tighten by hand.
• Wipe clean all the oil spillage.
9
ENGLISH