Use - Lofrans 74317 Manual De Instalacion Y Uso

www.lofrans.com

4 USE

For instructions on making electrical connections, see the wiring diagram below (chapter 5).
- Connect the cables to the push-in connector with finger-operated release button, tools not required
- Switch on electrical power. Be sure that the controls operate in the correct direction. Ιf not, swap
the UP and DOWN wires going to the connector.
-Push the 2 button simultaneously to turn ON the device.
- Push UP or
- Release the button to stop.
- After 3 minutes the device turns OFF automatically following by a double "beep" sound indication.
• To remove the clip-on cover, slide a flat headed
screwdriver, with 6-7 mm wide tip, between the
clip-on cover and the dashboard at position (a) and
then position (b) and twist the tip slightly. Push in
the tip of the screwdriver at least 3 to 4 mm before
twisting it. (see Fig.5)
Fig.5
DOWN command to use windlass.
UK
7