Cautions; Security; Risk Of Electric Shock Or Electrocution - Furius FIX 251 Manual De Instrucciones

CAUTIONS

2.
The entire instruction manual must be read. Ignoring these instructions may create a risk of electric shock,
fire and/or severe injury. It is also recommended to read the accident prevention regulations of the
metalworking industry workers association (BGV D1, BGI 855, etc.).
Electric arc welding is a dangerous activity, both for those who apply it and for third parties. You should
always wear adequate protection when welding and handling a welding machine. For more information,
see the operator's safety guidelines in accordance with the manufacturer's accident prevention
requirements.
3.

SECURITY

Risk of electric shock or electrocution.

Body contact with electrically active parts of the machine or its accessories (electrodes, electrode holders,
torches, work clamps) can cause an electrical shock that can be fatal or cause serious injury.
• Do not use the machine in the rain or snow.
• Do not touch
• Always wear insulated welding gloves, making sure they are dry and in good condition, without breaks or
perforations.
• Electrically isolate the work area so that people are protected. Do not remove the case of the machine or
manipulate it internally when it is connected to the power supply.
• Only connect the machine to a 220 Volt 50 / 60Hz AC power source.
• Make sure the power board has the 60 Amp thermomagnetic switch and the ground connection properly connected.
Please read this manual carefully before using the welding power source
the electrodes or
PRECAUCIÓN
welding accessories with your bare hands.
5