Riding Operation; Turn On/Off; Brake - Sparco eMobility SEM1 Manual Del Usuario

RIDING OPERATION

1 Start
Press the "ON/OFF" button for about 3 seconds
to turn on the power.
4 Use of the lights
In the power on status, double-press the "ON/OFF"
button, the headlights and tail lights will light up
simultaneously.
2 One foot on the scooter
Place one foot on the scooter, keep the other on the
ground. This electric scooter is set to a non-zero
start, so you have to start by sliding like a normal
scooter. Push the scooter for 1m forward with the
foot on the ground then press the accelerator.
After that the function will be normal.
5

Brake

Under normal circumstances, your hand grips the brake
lever firmly, and the scooter will decelerate immediately
and then stop. When the driver grips tighter, the brakes
will become more powerful. When braking, do not use
too much force, it is very dangerous.
3 Press the right thumb
Press the right thumb v with your thumb of right
hand, the greater the angle you press, the faster
it will be.
9